Avoid Damage From High Water Pressure?
If the water pressure in your sinks and shower is erratic or seems very strong at all times, this may indicate that the water pressure being supplied to your home is too high. If the water pressure in your sinks and shower is erratic, or if the pressure seems very strong at all times, this may also be an indication. As a result, you will have a better shower, which will raise your water bill. In addition, high water pressure can place additional strain on your pipes, which, if the pressure is high enough, can lead to the pipes leaking. If the pressure is low enough, the pipes won’t be affected. It will be a relief to learn that a pressure regulator can assist you in finding a solution to this problem.
How Do I Know if My Pressure Is too High?
Observation is the most straightforward approach for detecting whether or not a pressure level is high; if water is being discharged from your sink at excessive pressure, you should look into the situation. Another indication that something might be wrong is if you hear thumping or banging from your pipes (also known as a water hammer). The only way to know for sure is to go out and get a pressure gauge and then attach it to a faucet or hose outlet that is positioned close to your water meter. This is the only way to get an accurate reading. Because most household plumbing systems are not built to cope with pressures of this magnitude, you need to take action to remedy the problem if the pressure in your plumbing system is higher than 80 pounds per square inch (psi). It is essential to collect measurements at a variety of time intervals in order to compile a more complete data set. This is because pressure variations might occur at any point during the day.
What Are the Consequences of High Pressure?
High water pressure’s most common negative effect is that it will cause your plumbing system to develop leaks. These are very tiny pinhole leaks, and they only happen at random intervals. If so, that would make sense. If the leak occurs in a part of your home where it can cause structural damage to the floor or walls, then even a small leak can cause significant problems. Your appliances, like your washing machine and your water heater, can experience premature failure if they are subjected to stress caused by water pressure that is either inconsistent or excessive.
What Causes the Problem?
Where exactly do you consider yourself to be at home? Is there going to be a hill involved? One of the most common causes of high water pressure is that the water flows against its natural tendency to flow in a downward direction. Because of the need for large buildings or fire hydrants, the water pressure in your region may be maintained at a high level by the local water company. This is done to satisfy the requirements. In addition, high pressure may be caused by thermal expansion in your home, which occurs when the water volume shifts due to the warmth provided by your water heater. This phenomenon can lead to the development of high pressure.
What Can I Do?
Even if your water pressure rarely exceeds 80 psi, installing a pressure regulator on your main water line is still a good idea. This will allow you to keep your water pressure at a safe level. Because of this, you can keep the water pressure throughout your home at an appropriate level. The regulator will lessen the air flow entering your home and maintain the pressure at a proper level. In this manner, you can avoid the need to pay for additional water that you do not require, and in addition, you can reduce the amount of wear and tear that is placed on your plumbing and faucets.
