water fire

How to Avoid a Plumbing Fire?

The plumbing fire system in your home is probably not the first thing that comes to mind when you think about potential sources of household fires. However, despite the fact that your pipes in and of themselves do not present a risk of fire, fires can and do break out as a result of the negligence or carelessness of plumbers or of certain other factors. Continue reading to find out how a fire could start in your plumbing and what you can do to stop it from happening.

On the Dangers of Soldering

A plumber in El Paso, Texas, recently caused $20,000 worth of damage to a home when he created a fire in the dwelling while he was soldering something. The fire was accidentally started by the plumber. After that, in the month of April, plumbers in El Paso were guilty for sparking yet another fire, this time at a motel. According to the National Fire Prevention Association, one of the top ten causes of residential fires that occur each year is the torches used by plumbers to solder metal pipes. In point of fact, the National Fire Prevention Association lists this as one of the top 10 causes.

Having said that, this does not always suggest that you should stay away from using metal pipes altogether. When a job requires soldering to be done, you need to make sure that you choose only licenced plumbers who take the most stringent precautions to protect their personal safety. Only then can you be confident that the job will be done correctly.

If you decide to fix the plumbing problems on your own, you need to make sure that you observe the highest possible safety requirements so that you do not accidentally start a fire. Always use a flame protector cloth or a steel plate to cover any combustible item that is close your soldering site, and make sure that your soldering torch is turned off before you put it down. If you have any questions about how to safely solder, please don’t hesitate to contact us.

In addition, in the event that you do not have a fire sprinkler system, you should make sure that you have a fire extinguisher as well as a bucket of water close by in the event that an accident does take place.

Hidden Leaks and Frozen Pipes

There is still another clandestine way that has the potential to ignite a fire in your home’s plumbing system. If you have a hidden leak somewhere in your plumbing system, it is possible for water to get into an area of your plumbing system that contains electrical wiring. This can happen if you have an area of your plumbing system that is leaking. Sparks could be produced by the water, which could then lead to a fire if the insulation that surrounds the wire isn’t up to snuff. If you want to avoid being in this situation, you should be on the watch for abnormally high water bills as well as discoloured stains within your home, both of which could be indications that there is a leak somewhere.

When you take measures to keep the pipes in your home from freezing throughout the course of the winter, you actually are putting yourself and your family in danger of an additional high risk of fire. Sometimes the danger comes from adopting preventative measures, such as wrapping pipes with heat tape if they are located in uninsulated regions of the house, such as beneath porches or in attics. Other times, the danger comes from not taking preventative measures. In the event that it is not applied in the correct manner, heat tape has the potential to overheat and catch fire. In point of fact, figures supplied by the Consumer Product Safety Commission (CPSC) indicate that faulty heat tape is to responsible for 1,500 fires, 100 injuries, and 10 deaths every single year.

People can also get themselves into trouble after their pipes have already frozen by attempting to defrost them with an open flame, which is dangerous and should be avoided at all costs for safety reasons. It is also possible for people to get themselves into trouble by trying to defrost their pipes before their pipes have even frozen. You should use anything like a hairdryer, a heat lamp, or even a heated towel if you want to melt the ice without running the risk of starting a fire.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *