4 Reasons You’re Struggling With Low Shower Pressure
A person’s ideal level of pressure in the shower is highly subjective. While some people prefer a more moderate flow, others are more interested in a strong current. A shower that is ineffective as a result of abnormally low water pressure is a terrible experience, as most of us can concur on this point.
There are a lot of different things that could be the cause of a shower with low pressure, such as a control valve that is only partially open, a broken pressure regulator, a pipe that is leaking, or a shower head that is clogged. You might be able to solve some of these problems on your own, but others could require the assistance of a licensed plumber.
1. Partially closed control valve
If you’re lucky, there’s a very easy reason and solution for the low water pressure you’re experiencing. Check the main shut-off valve for your home’s water supply, which is normally located close to the water meter. If you just had a repair done on your plumbing, this valve may be still partially closed, which will limit the amount of water that may enter your home. This valve has also been known to be mistakenly bumped by a homeowner who is unaware of its existence, resulting in the homeowner’s water pressure being reduced. After ensuring that the valve is fully open, the pressure should be re-evaluated.
2. Faulty pressure regulator device
It is the responsibility of pressure regularly to ensure that the water pressure in a residence is kept within the recommended range of 45-60 psi. It is not unheard of for a pressure regulator to fail or become worn out over time, which can cause your water pressure to become unbalanced. Has the device been inspected by a plumber to determine whether or not it needs to be fixed or replaced?
3. Leaking Pipe
The plumbing system can be quite intricate, consisting of a network of pipes that are typically hidden behind walls, above ceilings, below floors, or anywhere else that has not been finished. If you have a pipe that is leaking, you might not be able to see the leak immediately away; however, you might detect the impacts of the leak or warning signals associated with it. If there is a leak in a pipe, the amount of water that comes out of your shower head will be reduced. This is something that you can probably imagine already. Because a leak can also lead to floods and expensive water damage, you should call a plumber as soon as you feel there may be a problem if there is one.
4. Clogged showerhead
Mineral deposits have the potential to accumulate in the minute jet holes of a showerhead over time. Your shower’s water flow and pressure will be negatively impacted as a result of this. The shower head can be easily cleaned by removing it and placing it in a plastic bag that has been filled with vinegar for the night. You can also scrape the shower head with an old toothbrush to remove any muck that has become adhered to it. Last but not least, if the fixture is truly old, it may be best to replace the shower head, which is an operation that is not too difficult and does not cost very much money.
